Among the numerous obligations RTOs face post-registration—annual declarations, AVETMISS reporting, marketing compliance—validation is often the most dreaded.

Even though we’ve written about validation several times, let's revisit its definition. ASQA calls validation a quality review of the assessment process.

Validation is the process of confirming accurate areas in an RTO's assessment process and pinpointing elements for improvement. With a correct understanding of its components, it’s less daunting.

As stated in Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and adhere to the Principles of Assessment and Rules of Evidence.

We must adhere to the standards by conducting two types of validation.

The initial type of assessment validation ensures compliance with the training package assessment requirements within your RTO's scope.

The subsequent validation type ensures assessments are in line with the principles of assessment and rules of evidence.

This shows that validation happens pre- and post-assessment. We will focus on the first type—assessment tool validation.

A Look at the Two Types of Assessment Validation

Assessment Validation Explained

As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation or assessment tool validation focuses on the first part of the clause, ensuring that all unit requirements are met and that workbooks are entirely compliant.

Post-assessment validation, in contrast, is about the implementation, requiring Registered Training Organisations to conduct assessments adhering to the Principles of Assessment and Rules of Evidence.

Our focus here will be on assessment tool validation.

How to Properly Conduct Assessment Tool Validation

After reviewing the two types of validation, let’s explore the specifics of assessment tool validation.

When to Conduct Assessment Tool Validation

The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

Thus, whenever new learning resources are purchased, you must conduct assessment tool validation before allowing student use.

You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.

However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:

- resources are updated
- new training products are added on scope
- your course gets reviewed against training product updates
- identify your learning resources as a risk during your risk assessment

ASQA's risk-based regulation approach means RTOs should perform regular risk assessments. If students complain about learning resources, it's a perfect time for assessment tool validation.

Which Training Products Should You Validate?

Bear in mind, this validation is meant to ensure all learning resources are compliant before use. All RTOs are required to validate all unit resources.

Assessment Tool Validation: Required Resources

Academic Resources

Given that you are conducting assessment tool validation, you will need the full array of your learning resources:

Mapping tool – the primary document to check. It reveals which assessment items align with unit requirements, expediting validation.

Learner/student workbook – ensure it is suitable as an assessment tool during validation. Check if instructions are clear and answer fields are sufficient. This is a common issue.

Assessor guide/marking guide – check that instructions for assessors are adequate and that there are clear benchmarks for each assessment item. Clear benchmarks are essential for reliable assessment outcomes.

Other related resources – these might include checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are appropriate for the assessment task and meet unit requirements.

Panel for Validation

Clause 1.11 outlines the criteria for validation panel members, specifying that validation can be done by one or more people. RTOs typically require all trainers and assessors to participate, occasionally inviting industry experts.

Your validation panel must, as a group, possess:

Vocational competencies and current industry skills applicable to the unit being validated

Recent knowledge and expertise in vocational teaching and learning

One of these training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or the successor version

Assessment validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool aids both the validation process and documentation. It simplifies seeing how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.

ASQA does not specify a required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools as a whole to ensure they meet the principles of assessment.

Assessment Principles Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates simplify validation, they can lead to judgment errors due to limited space for comments on each assessment item.

A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Instructions for Assessment Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Needs Checking?

As discussed in our blog post Common Problems In Assessment Tools, it’s essential that your assessment tools enable trainers to follow assessment principles and evidence rules.

Fundamental Principles of Assessment
Fairness – Does the assessment process provide equal opportunity and access to everyone?

Flexibility – Does the assessment accommodate different options to demonstrate competence according to various needs and preferences?

Validity – Is the assessment evaluating what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment produce consistent results every time, regardless of who conducts the training? Will different assessors make the same decision on skill competence?

Evidence Basic Rules

Validity – Is the evidence proof that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool verifying that the work belongs to the candidate?

Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?

Although these are commonly addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.

To prevent using learning resources that overlook some unit requirements, make sure to follow these guidelines:

Walk the Talk

Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Perform each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

change diapers

prepare bottles, bottle-feed babies, and clean equipment

prepare solid food and feed infants

respond to baby signs and cues suitably

prepare babies for sleep and settle them

monitor and promote physical exploration and gross motor skills suitable for the age

Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at read more least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.

All or Not Competent

Mind the lists. In the previous example, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail

Every assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions do not confuse students or assessors. For example:
What kind of information can be included in a work package?
What information can be included in a work package?

Possible answers include:

Mandatory resources

Corresponding costs

Time required for activities

Assigned functions and responsibilities

If an assessment item calls for several answers, specify the number of answers needed from a student. This ensures your assessment is reliable, and the evidence gathered is valid.

This is true for assessment items with double-barrelled questions or questions requiring more than one answer at the same time. These can confuse students and assessors, as shown in the sample question below:

Name a hazard and/or environmental concern in the workplace and choose the most effective hazard control hierarchy.

Answers can include, but are not limited to:

Weather conditions – isolating the work area, engineering controls, personal protective equipment

Work area and ground conditions – elimination, isolation, use of engineering controls

People – isolating, use of engineering controls, administration

Structural hazards – substitution, isolating, engineering controls

Chemical hazards – isolation, use of engineering controls, administration

Equipment or machinery – isolating, engineering, administration

Steering clear of double-barrelled questions makes it simpler for students to respond and for assessors to judge competence accurately.

Considering these requirements, you might wonder, “Don’t learning resource developers have audit guarantees?” But these guarantees mean you have to wait for an audit to rectify noncompliance. This impacts your compliance history, so it’s wiser to take a safe and compliant approach.